To recreate the grain of the leather
Grain Copier is a very advanced product, made up of 2 components, used in recreating the grain pattern of leather in just a few minutes. This speciality product is supplied in an easy, ready-to-use 50 ml packaging.
1. Apply Leather Protector on the leather near to the damaged area.
2. Press the same amount of product out of the two components and mix well as quickly as possible before it hardens.
3.On the area where Leather Protector was applied, immediately apply Grain Copier. Cover with Heat Repair.
4. Leave to dry well.
5. Remove the applied product.
You should have obtained a perfect copy of the leather grain, with a copy that can be used many times. 
Heat Repair
This product is studied to reproduce grain on heavily damaged leather.
It is cured by heating it with the Heat Iron and will produce a permanent flexible bond with the surrounding leather. When properly applied, in most cases the repair will be invisible!
1. Clean the damage area with Deep Cleaner F.
2. Fill it with Heat Repair.
3. Put the grain copy pad on top of the Heat Repair.
4. Put Heat Paper Repair on top of the grain copy.
5. Move the Heat Iron slowly over the Heat Paper Repair in a circular movements for about 30-40 seconds.
6. Remove the Heat Paper Repair and the grain copy pad.
7. Color the damage area using the correctly matched Touch Up Pigment or copletely refinish the leather as needed.
8.When the color is completely dry, apply Leather Protector
| Placering Pluk | Mangler_________ |
| Fare | ❄️Tåler ikke frost i våd form |
| Egenskaber | 🧪Test først på et usynlig sted, Kun til alle glatte lædertyper |
Kommentarer 0
Kunder der har købt dette produkt har også købt
